How To Connect Garmin Vivofit 4 To Iphone

Chosen Solution

First check that both devices being paired have their bluetooth systems activated; make sure the GarminConnect app is allowed to access the bluetooth capabilities of the phone. (Check the bluetooth tab in the settings app of your smartphone) Once you've completed these steps and are still unable to pair the devices, check out the phone pairing subsection of our troubleshooting page here: Garmin Vivoactive Troubleshooting

Was this answer helpful?

Voted Undo

Score 11

Most Helpful Answer

Hi ! I had the same problem and this fixed it!

Go to your Garmin connect app

Click on the icon on the upper left!

Select settings

Go to the absolute bottom of the page! The you can enable the connector help ( is it recommended that you disable then enable you Bluetooth on you phone before enabling the connector help!) ( I Don't know If the name is connector help but in French it's "aide de connection à l'appareil...)

I hope I helped some of you guys!

If you have problem pairing your device, do as Erica Milford! My solution is for connection issues only ( I think)

Was this answer helpful?

Voted Undo

Score 15

OK heres the answer - its not intuitive at alkl and drove me crazy!!

There is a pairing option on the watch - if you dont activate it and use the other links etc on the app and even the phone without bringing up pairing IT WONT PAIR. It must pair to sync so focus on that!

Go on the wrist watch HR, press the button, slide to Bluetooth, switch it on and THEN look for pairing and activate it on the phone

Seriously this will sort it - whoever wrote the program for this needs shooting - its not intuitive at all

Was this answer helpful?

Voted Undo

Score 8

Same problem. I have a Galaxy S5 mini and after 2 months of flawless performance I lost the Bluetooth connection.

- I uninstalled the app, powered down the phone, switched it on again, re-installed the app (historic data still there).

- Next I went into the Bluetooth settings on my phone. I unticked the "only visible to paired devices" box and hit SCAN - it found the Vivoactive HR device and asked for a PIN number.

- I then went into the Bluetooth settings on the watch (as described above) and selected "Pair mobile device" - a 6 digit PIN number appeared on the screen which I typed into the phone and miraculously the phone now recognises the watch.

- I manually synced the watch and was prompted to allow alerts from Garmin device. All data now up to date.

Thanks everyone - the above all helped to get me to a solution.

Was this answer helpful?

Voted Undo

Score 6

When you have issues with the bluetooth connection, here are the steps that should be followed.

I always start by going to the app and tapping on the menu icon in the top left which looks like three lines. (iOS has a "more" button bottom right).

Scroll down and tap the "Garmin Devices" option.

If the bluetooth is turned off on the phone this page would prompt you to turn it on. It would show you for instance weather the vivoactive was "connected", "not connected", or "no devices paired". It obviously needs to be connected.

If it is not connected that means the phone still remembers the pairing but is not communicating with the watch.

Try turning on and off the bluetooth on the phone.
Try powering on and off the phone and the watch.
Try putting the watch in to pairing mode.
For the vivoactive that is right button>swipe right>settings>bluetooth>pair mobile device. It should say "searching for garin connect mobile" if it is in the pairing mode.

If the above fails it would then be necessary to unpair and repair the connection.

Start by removing the watch from the Garmin Connect app. In the Garmin Devices page, press and hold on where it says "vivoactive not connected" then tap on "remove device" and confirm the action (iOS is different you don't press and hold just tap on it and then tap on the three dots in the upper right corner of the next page).
Then make sure the phone no longer remembers the connection in the phone's bluetooth settings menu.
Then turn off the bluetooth and clear the cache for the app if on Android and for the phone if on iOS. For android this would be in the app manager>connect>storage and iOS would be holding the Home and Power buttons (iphone 7 it's down volume and power) till the screen goes blank and displays and apple logo. It is important to release the buttons as soon as you see the apple logo.
Once the cache has been cleared turn the bluetooth back on and go to the Garmin Devices page in the Garmin Connect app.
Tap on add a device at the bottom of the page and chose "browse all compatible devices" at the bottom of the list. Then chose "vivo" and then "vivoactive".
It should then prompt you to put the watch in pairing mode. Follow the previously mentioned steps for that.
If all goes well it should prompt you for the pin. This must be entered correctly in 60 seconds on android and 30 seconds on iOS.

Things to bear in mind:

Android 6 and above require the location permission to be turned on for the app to have access to the bluetooth radio. This includes the global location settings and the app location setting.

If you experiance frequent disconnects or the watch fails to reconnect with the phone after you walk away and come back try "update connection" this is a new option that was introduce for Android only with the app version 3.11. If you go to the Garmin Devices page and hold your finger down on the watch in question while it is in the "connected" state. It will pop up with a list of options. As previously mentioned this is where you can remove the watch but you can also "update connection". This will pair the watch to the phones bluetooth settings menu while it is still paired to the app. Sometimes it is necessary to reboot the phone after doing this so the watch will connect back up to the app.

For iOS users, if you experience issues after an iOS update try clearing the cache first.

Was this answer helpful?

Voted Undo

Score 3

With iOS I have found if you close the Garmin Connect app that is running in the background by pressing the home button twice and swiping up to actually close the app the Bluetooth connection is disabled. I tested it out and have no issues with my phone randomly unpairing unless I am out of range. Hope this helps!!

BTW I have the most up to date iOS on the iPhone 6Plus

Best,

Dave

Was this answer helpful?

Voted Undo

Score 2

Trying to pair my VivoactiveHR to my andriod without luck. I check my phone setting and the bluetooth is allowing access to the app (and yes I do have the bluetooth button turned on as well), but my Garmin watch keeps saying pairing failed "Try Again" or "Cancel" after searching for the Garmin Connect Mobile without success. At one point it said "Pairing" for about 30 minutes but my phone couldn't find the Vivoactive, so I restarted both the watch and my phone several times.

I'll click try again, my phone says "Setting up Device..." but is continuously pending. No luck pairing. Any useful tips?

I was about to figure out the solution to the problem I was having. So I uninstalled the app on my phone, re-installed it. I did a manual re-start of my watch. Started from scratch. Then I turned off all the bluetooth device anywhere around me; apparently when you FIRST sync the two together, other bluetooth devices result in interference.

I then went to my Samsung's bluetooth setting and allowed my phone to sync with the Vivoactive. After doing that, I went to the app, clicked pair, went to my watch and clicked pair with mobile device, and they eventually found each other and synced properly.

Was this answer helpful?

Voted Undo

Score 2

Simple solution -

1. Delete the app on your phone.

2. If the app asks you if you want keep your data saved to date say yes.

3. Download the app again.

4. Log in again and bingo!

Was this answer helpful?

Voted Undo

Score 1

Just solved mine, vivoactive HR not syncing coming up with network error. Deleted watch from app, then deleted app from phone, left ten minutes downloaded Garmin connect from apps store, run through set up again watch now working and syncing, let's hope it continues.

Was this answer helpful?

Voted Undo

Score 1

After restoring my Note 3, my phone and Vivoactive HR would not pair. The solution for me was to push and hold the right button on the front for of the Vivoactive HR two or three seconds. Next, on the phone, go to - "settings" - "Bluetooth" - "Pair Mobile Device". In Bluetooth settings, under "Paired devices", you should see the Vivoactive HR. Next you'll be asked to enter the passphrase; enter the code displayed on the watch. Run the Connect app, entering your account info. Skip the pairing the device, it should be listed once the app loads. Hope this helps.

Was this answer helpful?

Voted Undo

Score 1

These instructions are for vívoactive HR (4.00 firmware) stuck on Completing Setup screen on Garmin Connect Mobile (GCM) for iOS.

Long press right button on vívoactive HR to open menu, then select _Settings_, then select _Bluetooth_.
If a menu shows _Status: Connected_, then vívoactive HR is already paired to a device.
1. On iOS device, open Settings app, then select _Bluetooth_, then check if vívoactive HR is listed under _My Devices_ If its status is _Connected_, then you're already paired with the vívoactive HR.
2. Try adding the device again in GCM app.
3. If it still fails to be added in GCM, go back to the Bluetooth Settings in iOS, then select the info (i) button for vívoactive HR, then select _Forget This Device_.
Long press left button on vívoactive HR and select _Power Off_.
Once powered off, press left button on vívoactive HR again to power it on.
Once it powers back on, long press right button on vívoactive HR to open menu, then select _Settings_, then select _Bluetooth_, then _Pair Mobile Device_.
On GCM app, try adding the device again. iOS device should prompt for a 6 digit PIN that is displayed on the vívoactive HR display. After you enter this PIN, it should only take a few moments to finalize pairing the device.

NOTE: You may want to try pairing away from other devices as they may cause interference.

Was this answer helpful?

Voted Undo

Score 1

For me, pairing from Settings on my iPhone and my Garmin Forerunner 630 didn't work (after 4 months of no trouble). None of the following worked: trying to pair after rebooting phone and watch, trying to pair with wifi off, trying to pair with Garmin Connect app running or not running in the background.

What did work was deleting the Forerunner from Garmin Connect and then adding it and pairing it from Garmin Connect. That worked.

Was this answer helpful?

Voted Undo

Score 0

After my second pairing process from scratch and after my vivo active hr did its second automatic software update - the watch is running and syncing like a dream. Deleted app and downloaded it again. If the app aks you if you want keep your data saved to date say yes. And wait for second softw update. Hope its works for you too

Was this answer helpful?

Voted Undo

Score 0

Check your Android > settings > Bluetooth and make sure your VA is NOT paired. Remove if it is. Now go into Garmin connect app > devices. Make sure your VA is paired there. Hope this might help you. In case, if you still face same issue check Garmin Vivoactive Manual and perform advanced initial bluetooth setup.

Was this answer helpful?

Voted Undo

Score 0

Hi,

I have had the bluetooth connection fail to connect to my iphone 5s.

To solve the problem, I did the following

1. Click on the right button and swipe left to access 'Settings'

2. In Settings, swipe left twice to access 'Bluetooth'.

3. In Bluetooth, swipe left twice to access 'Pair Mobile Device'.

4. Open your Iphone Bluetooth and then open Gamin Connect and go to 'Devices'.

5. Click on 'Pair Mobile Device'. You should then be asked for a PIN. Enter the PIN.

The device should now be paired.

If your Vivoactive says "Paired" (as mine did) and won't let you pair with your phone, go to "Restore Defaults" in the watch Settings and reset. Then try and pair devices again.

Since I managed to pair the phone and the watch, the Bluetooth has functioned.

Was this answer helpful?

Voted Undo

Score 0

I found a good solution - delete the App on the Iphone and then reinstall it, and re-pair the device as new. Because the unsynced data is on the device and the rest is on the Garmin account, you don't loose any history.

My issue was my vivofit 3 stopped pairing after a few weeks of international travel. I had paired it overseas, and when I got home it wouldnt re-pair to change the time to local time. I deleted the app from the phone, and managed to re-pair it as a new device.

Worked!!

Was this answer helpful?

Voted Undo

Score 0

I solved the problem by resetting the Vivoactive HR to factory default, then when it comes back up starting to find Garmin Connect Mobile, my phone pick up the signal in a flash, now it is paired properly.

Was this answer helpful?

Voted Undo

Score 0

Had this exact issue also. Here is how I finally connected after trying everything..

Must use the mobile Garmin ap. At the very bottom are five selections with the right most being "More"..

Select "More"..

Select "Garmin Devices"..

At the very bottom select "Add Device"..

On the watch select to pair with phone..

Follow directions on mobile ap.

Hope this helps.

Was this answer helpful?

Voted Undo

Score 0

Mine has been having sync issues since the last time the VAHR updated its firmware.

Tried rebooting both devices, deleting and reinstalling the iPhone app multiple times, ended up having to "Restore Defaults" in the VAHR to get it back.

I guess something got corrupted the Bluetooth setting on the watch.

Was this answer helpful?

Voted Undo

Score 0

Clear all the cache of your device and try to repair.

If it dosen't work try to reboot or reset your device to fix garmin sync failed issue

Was this answer helpful?

Voted Undo

Score 0

Had this exact issue also. Here is how I finally connected after trying everything...

Must use the mobile Garmin ap. At the very bottom are five selections with the rightmost being "More"...

Select "More".

Select "Garmin Devices"...

At the very bottom select "Add Device"...

On the watch, select to pair with the phone...

Follow directions on mobile ap.

Hope this helps.

Garmin Nuvi updates

Was this answer helpful?

Voted Undo

Score 0

***Harry Styles Merch*** Official Store for all harry styles fans. Get Amazing Harry Styles merchandise Hoodies, sweatshirts and Tshirts. Fast Shipping Worldwide.

Was this answer helpful?

Voted Undo

Score 0

***Faze Merch*** is the official shop for real Faze Clan fans. Get Amazing Faze Champion Merch, Faze Clan hoodies and shirts with Big Discounts.

Was this answer helpful?

Voted Undo

Score 0

***''The PIE device''*** effectively provides Neurogenic Bowel relief and management for patients with Spina Bifida, Spinal cord injury, and chronic constipation. It is for those who have tried laxatives and enemas without suitable results.

Was this answer helpful?

Voted Undo

Score 0